Specifications

REV.-A
~ ‘ss’”6” ‘“’N’s
When engaging the timing belt to the carriage, make sure that 3 grooves can be seen at the end
of the belt as shown in Figure 3-27.
,H
I
1
:
1
t
Timing Belt
3 grooves
Figure 3-27. Engaging Timing Belt
REQUIRED ADJUSTMENT ITEMS
If
you have reassembled the carriage, make the following adjustment in the specified sequence.
(1) Timing belt tension adjustment (Refer to section 4.3.)
(2) Platen gap adjustment (Refer to section 4. 1.)
(3) Platen gap adjustment (Refer to section 4.2.)
(4) Printhead slant adjustment (Refer to section 4.5.1)
(5) Print position adjustment (Refer to section 4.5.2)
e’”
. . . .’,
c .,
,.,.
L
“;’ /j
3-26