Specifications

REV.-A
3.2.7.3 Disassembly of PUMP ASSY. and CLEANER ASSY.
[Step 1]
[Step 2]
[Step 3]
[Step 4]
[Step 5]
[Step 6]
Remove the housing. (Refer to section 3.2. 1.)
Remove the printer mechanism. (Refer to section 3.2.4.)
Remove the CAP
ASSY.. (Refer to section 3.2.7.2.)
Remove the TUBE, SUPPLY, INK, from the PUMP
ASSY..
Unscrew two screws (C.B.S. screw (M3X 8)) which fasten the PUMP ASSY. to the frame, and
remove the PUMP
ASSY..
Separate the CLEANER ASSY. from the frame.
/- CAUT’*N ~
Never touch the rubber section of the CLEANER ASSY..
Figure 3-22. Disassembly of PUMP ASSY. and CLEANER
Screws (M3x8)
ASSY.
3-22