Specifications

REV.-A
3.2.7.2 Disassembly of CAP
ASSY.
[Step 1] Remove the housing. (Refer to section 3.2. 1.)
[Step2] Remove the printer mechanism. (Refer to section 3.2.4.)
[Step 3] Unscrew the 3 screws
(C.B.S. screw (M3x8)) which fasten the FRAME, STRENGTHEN LEFT,
and remove the FRAME, STRENGTHEN RIGHT.
[Step 4] Unscrew
C.B.B. screw (M3x8)which fastens the CAP ASSY. to the FRAME, FRONT, and remove
the CAP
ASSY..
[Step 5] Separate the tube of the PUMP ASSY. from the CAP ASSY..
CAP ASSY.
FRAME, STRENG THEN RIGHT I
C.B .S. Screws (M3 X 8)
C,B.B, Screw (M3 X
Figure 3-21. Disassembly of CAP ASSY.
3-21