Specifications

REV.-A

3.2.7 Printer Mechanism Disassembly

This section describes how to disassemble the printer mechanism.

WARNING

When working with the printer mechanism, take sufficient care in handling the ink. Carefully read

the precautions in 3.1.1 before beginning the work.

3.2.7.1 Disassembly of PAPER HOLDING ASSY.

[Step 1] Remove the housing. (Refer to section 3.2.1.)

[Step 2] Remove the TORSION SPRING, 6750 (LEFT) from the hook on the left frame.

[Step 3] Remove the TORSION SPRING, 6750 (RIGHT) from the hook on the right frame.

[Step 4] Remove the TORSION SPRING, 6750

(LEFT)from the left hook of the PAPER HOLDING ASSY..

[Step 5] Remove the TORSION SPRING, 6750 (RIGHT) from the right hook of the PAPER HOLDING

ASSY..

[Step 6] Remove the two E-rings (4)thatfasten the PAPER HOLDING

ASSY.,

and then remove the PAPER

.:+

.,,,

,.,

HOLDING

ASSY..

PAPER HOLDING ASSY.

TORSION SPRING, 6750 (LEFT)

‘igh’Frame*$;:

TORSION SPRING, 6750 (RIGHT)

c’

,,,.~

Figure 3-20. Disassembly of PAPER HOLDING ASSY.

G’

3-20