User guide

Page 58
TO SET COLOR AND PAPER SETUP OPTIONS:
• Click the Color and Paper Setup tab in the Printer Setup window.
Color and Paper Setup
Color Mode—Specifies the default color mode to be used: Color or Grayscale. Before per-
forming calibration on the RIP Station, select Color as the Color Mode.
Default Paper Sizes—Specify whether to print on US paper sizes (for example, letter, legal,
tabloid), or Metric paper sizes (for example, A4, B4, A3) by default. When no page size is
defined within a PostScript file, jobs are printed on letter paper if you select
US, or A4 paper
if you select
Metric.
Allow Courier Substitution—Specify whether to substitute Courier for unavailable fonts. If
this option is set to No, jobs with fonts that are not available on the RIP Station hard disk
will not print due to a PostScript error.
Print to PS Error—Specify whether the RIP Station should print the available portion of a
print job when it encounters a PostScript error. Select
Yes to print the portion of the job
that was processed before the error occurred; select No to cancel the job entirely whenever a
PostScript error is encountered.
RGB Source—The RGB source is the color space used to control color for conversion from
screen to printed output. EFIRGB, which is the default, is based on the reference points used
in the creation of the RIP Station software; sRGB (PC) is based on an average of a large num-
ber of PC monitors; and Apple Standard is the standard reference point for Apple’s Col-
orSync software.
Pure Black Text/Graphics—Select On to print black text and graphics as one color black,
using 100% black ink only. Select Off to print black text and graphics using all four colors
of ink.