User manual

94
The flatness and symmetry tool automatically assigns the horizontal and vertical
analysis path lines. Use the analysis configuration tool, to make the analysis include
used analysis path lines. The detected results may depend on the average width of the
chosen analysis path lines (average perpendicular to the path direction) and the color
channel used to analyze the image data.
The “Profile” tab (Shown right) displays a chart of
the profiles along the selected analysis path lines
(for this example, center cross) and a table with
the numerical analysis data according to the
selected analysis protocols for flatness, symmetry
and penumbra.
The profile data can be normalized in different
ways, use the Profile Normalization Tool, to
select the various normalization behaviors.