User manual

62
6. Full horizontal line: User sets the position of a horizontal line across the entire
image
7. Circle: User defines a circular path
8. Ellipse: User defines an elliptical path
9. Options: Presents options for the way in which the profile
path is displayed
10. Path range width: User defines the width of thew profile path
11. Copy path: Path can be copied for pasting on another image
in the Image Panel
12. Add current path to recent list: Saves the selected path to
file for later use
13. Delete path: Self-explanatory
The default settings display a diagonal profile 10 pixels wide for the treatment pPlan
(thick line) overlaid with the measured profile from the dose map (thin line). The icons
under the Profile Chart control
the display of the profiles
The icon controls whether
plan and measurement profiles
are displayed together or
separately. A selection can be
made to plot and display the
difference between the profiles.
The icon controls the range
and units on the y axis (the dose axis). A selection can be made to plot and display the
dose profiles normalized to the maximum value. Click the icon to display the path
editor tools and the envelope slider. These are helpful to make precise and repeatable
adjustments. By turning the buttons in the path editor tool the profile path can be
translated and rotated and the path width and length can be altered. The envelope