User manual

25
The Profile Panel
shows the image
profile along the user-
defined path in the
image. Click and drag
in the image panel to
create an image path.
Alternatively click the
profile icon on the
toolbar and select the
type of profile from
the menu. Click on the profile icon also to change the width of a profile path. Right-click
on the profile path itself to select the axis type from pixels, length or normalized. If
length is selected right-click again on the profile path to select the measurement units
The path profile shows in the Film Evaluation Panel as a line graph of dose or color
channel value versus position along the path. Depending on what image is selected
under the Case Data Selector, the graph presents information related to the color
channel value of a film image or the dose value for a selected color channel of a dose
map. Right click inside the graph to:
1. Change the units of the graph,
2. Copy the graph or
3. Change the configuration of the
graph.