User manual

23
The color channel spreader, spreads the color so that the selected image region is
displayed with a color saturation between 0% and 100%. This feature magnifies
differences in color. The color channel selector, selects the combination of red, green
and blue color channels for mapping the view of the image region.
Statistics Panel shows the dose histogram and the
image statistics. Information is displayed for the entire
image as well as the image around the cursor. In
addition information is displayed for any areas of
interest marked on the image. It displays the image
statistics all the areas in tabular form and of the full
frame or a highlighted area of interest in histogram
form. Use the window at the bottom of the panel to
select the histogram displayed. Move the cursor or
area of interest around to see the real time tracking of
pixel information in the “Cursor Region” column or
frame columns. Pixel statistics (#, #) at the bottom of the panel indicates the location of
the cursor. The two arrows, or
number format buttons, can change the format of the numbers displayed in the
window. Depending on the image selected from the Case Tree in the Case Data
Selector, the table will present information related to the color channel (film image) or
dose for the color channel (dose map image). Right click inside the table to:
 change the units and format of the column;
 copy the table;
 change the pixels of cursor region or 4) change the configuration of the table.
The histogram shows the bar graph for
probability versus dose or color channel
response. To zoom in, click and drag a region
from top left to bottom right of the preferred