User manual

129
Figure 7A Figure 7B
13. Compare the measurements with the plan. Add a New Case Object “Dose to
Plan Comparison” (Figure 8A). Then right click “Data Treatment Plan”, navigate
to the right folder and open the treatment plan (Figure 8B). Now click on the
Image Comparer tool. The treatment plan and dose map appear in the window.
Figure 8A Figure 8B
Use the tools along the left hand border to select an area of interest around the
treatment plan and then align the dose map to the plan. This can be done by
either highlighting the fiducial marks defining the axes of the treatment system or
by moving the dose map manually. Select coarse or fine manual motion and
move the dose map directly with the cursor or use the tools at the bottom of the
frame to move step-by-step. Add and position a rotation pole to rotate the dose
map relative to the plan.