User manual

120
8. Use the Frame Tool to mark areas of interest in the centers of the calibration
strips (Figure 5).
Figure 5
9. Click the “123” icon on the bottom right corner (Figure 6A). Select the “Color
reciprocal linear vs. dose” fitting function (Figure 6B) and type in the dose values
into the calibration table.
Figure 6A Figure 6B
10. Right click the “Film Calibration (ordinary)” data object, select “Save as fixed
calibration as Treatment Object” from the dropdown menu (Figure 7) and save
the calibration. The fit of the dose-scanner response function is valid and usable
between zero and the highest dose exposed on the calibration films. It is
“123” icon
Select areas of interest in
center of calibration strips