User manual

112
7. During a “Film Calibration – Mosaic” if many large strips are being used, the
images may need to be cropped. Too many strips could result in no image or an
image that doesn’t reflect all the selected regions of interest.
8. While FilmQA
™
Pro supports most image formats, importing lower resolution
image formats (i.e. JPEG) is not recommended. Too much information is lost with
those images. For quantitative analysis, importing a TIFF file is recommended.
9. Throughout FilmQA
™
Pro, absolute dose is used. Relative dose is not ideal and
was not incorporated in to the software. Furthermore, MU, or monitor unit, is not
used because the measure of machine output is dependent under particular
conditions.