QuickSpecs

QuickSpecs
HP EliteBook Folio 1040 G1 Notebook PC
Technical Specifications
c04111345 — Worldwide — Version 19 — October 29, 2014
Page 14
After being suspended with smart card present:
380 μA
After being suspended without smart card
present: 380 μA
Power Saving
Mode
With card present, before being suspended: 40.6
mA
Without card present: 380 μA
After being suspended with smart card present:
380 μA
Features
 Support single slot
 Support T0, T1 protocol
 Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442,
SLE4436,
 SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041
card via external EEPROM
 Support ISO7816 Class A, B and C (5V/3V/1.8V) card
 Implemented as an USB full speed device with bulk transfer
endpoint, Mass
 Storage endpoint
 Built-in PLL for USB and Smart Card clocks requirement
 Support EEPROM for USB descriptors customization (PID/VID/
iManufacturer/iProduct/Serial Number), Direct Web Page Link, and
accessing memory card module.
 EEPROM programmable via USB interface
 Support software update for memory card module
 Support Direct Web Page Link via configuration in external
EEPROM
 Support short APDU and extended APDU
 Compatible with Microsoft USB-CCID driver
 Support remote wake up through inserting card/removing card
 Support USB selective suspend
 Support Power Saving Mode (Using one pin to select between
Normal/PWR Saving Mode)
 Support card power over current protection mechanism
 Built in resonator.
 Support USB LPM (Link Power Management) features.
 Embedded clock source.
NETWORKING/COMMUNICATIONS
Intel I218LM Gigabit
Network Connection
(internal)
System Interface
Integrated on PCA
Controller
Intel I218LM GbE platform LAN connect networking controller
Memory
24 KB FIFO packet buffer memory
Data rates supported
10/100/1000 Mbps
IEEE Compliance
802.1P
802.1Q
802.2
802.3
802.3ab
802.3az
802.3u
Bus architecture
PCI Express and SMBus