User`s guide

Tap
You can perform one of the following operations by tapping the screen once while measuring.
Tapping is only supported while measuring in SF-710/SF-510.
Function Explanation
Lap Records the lap.
The same operation as pressing D while measuring.
Light Turns on the light. The light turns on for approximately 10 seconds.
The same operation as pressing B.
Screen Chg. Changes between the four measurement screens.
The same operation as pressing A.
OFF (default) Turns off tap operations.
Note:
❏ When you want to change functions operated by tapping, set Tap from the Mes. Settings menu.
U “Mes. Settings” on page 87
❏ The operation may not be recognized if you tap the screen rapidly in succession. Leave a gap of approximately one
second between taps.
❏ When bike mode is selected, the tap function may operate automatically depending on the condition of the road surface.
If this occurs, we recommend setting OFF.
SF-710/510/310 User's Guide
Preparing and Basic Operations
21