User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing with the Built-in Epson Driver - Windows 10 S
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Printing from a USB Memory Device
- Using Your Printer as a Copier
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
130
Custom Paper Setting
Setting Options Description
Change Name — Use the keyboard to enter a name for the
custom paper setting (this name is displayed
in the Paper Type list)
Change Reference Paper Various options Select the media type for the paper closest to
the one you are using
Advanced Media Setting options
Platen Gap Select a larger value if print results are
smudged by print head strikes
Top/Bottom Margins The Standard margins are as follows for the
top and bottom:
• CAD/line drawings: 3 mm
• Other: 30 mm
Select a different value as necessary. Left and
right margins are always 3 mm.
Paper Suction Select this to adjust the distance between the
paper and the print head; lower values for
thinner papers.
Back Tension Select High or Extra High if paper wrinkles
during printing
Drying Time Drying Time per Pass: Select from 0 to 10
seconds for the amount of time the print head
pauses to allow drying after each pass
Drying Time per Page: Select from 0 to 60
minutes for the amount of time the printer
pauses to allow drying after each page is
printed