User's Manual

129
Setting Options Description
PC Connection via USB Enable
Disable
Select Enable to allow access to the printer
from a USB-connected computer
USB I/F Timeout Setting 5 to 300 seconds Specifies the length of time before ending
communication from a USB-connected
computer
*The Printing Language, Universal Print Settings, and HP-GL/2 Unique Settings menus can be
locked by an administrator. If you cannot access or change these settings, contact your administrator for
assistance.
Paper Source Settings
Setting Options Description
Error Notice Paper Size Notice
Paper Type Notice
Select On to display an error message when
the output size or paper type settings are
different between the driver and printer
Roll Paper Setup Detect Paper
Meandering
Select On to display an error message and
stop printing if the printer detects the paper is
skewed
Print Cutting Guideline Select On to print cut lines on roll paper (if
Auto Cut is turned off)
Cut for Borderless Print Select Two Cuts to insert a margin and cut
twice between pages; or One Cut to cut once
between pages
Quick Cut Select On to cut once between pages while
the next page is still printing
Cut Mode Select Quiet to reduce the speed and noise
when cutting paper
Margin Refresh Select On to automatically remove ink stains
from previous borderless prints by trimming
the leading edge of the paper
Back Tension 2 Select the level of tension when the Back
Tension setting is set to Extra High