User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Print From Folder
85
Procedure to Print From
Folder
The procedure to Print From Folder from the
operation panel is described below.
Buttons that are used in the following settings
1
Confirm that the printer is ready to print. Press
the l/r buttons to select , and press the Z
button.
The Print Queues menu is displayed.
2
Press the d/u buttons to select Print From
Folder and press the Z button.
Only Print From Folder is displayed if an
optional hard disk unit or Adobe PostScript 3
Expansion Unit is not connected.
A list of the files in the shared folder appears
after a short while.
3
Press the d/u buttons to select a file to print and
press the Z button.
The print settings screen is displayed.
4
Press the d/u buttons to set the number of
copies. Press the Z button to start printing.
If the optional hard disk unit or Adobe
PostScript 3 Expansion Unit is not installed, the
number of copies is fixed at 1.
To change the paper source, press the Menu
button to display the Setting menu. On the
SC-T7200D Series/SC-T5200D Series you can
select Roll 1, Roll 2, Roll Auto, or Cut Sheet.
The preview screen appears if Preview is set to
Yes. Press the Z button in the preview screen
to start printing.
To cancel the Preview, press the W button.