User's Manual

Epson SureColor T-Series User’s Guide
Basic Operations
63
For OS X 10.6 and 10.5, click the arrow ( ) to
make settings on the Page Setup screen.
4
Check that this printer is selected, and then set
the paper size.
Select one of the following options for Paper
Size. XXXX is the actual paper size, such as A4.
XXXX: Print with margins on roll paper. Print
using the Roll Paper Margin> selected on the
printer.
U“Print Queues menu” on page 140
XXXX (cut sheet): Print with margins on cut
sheets. Print with top, right, and left margins of
3 mm and a bottom margin of 14 mm.
When performing borderless or banner
printing; see U“Borderless Printing” on page
98, U“Enlargements and Horizontal and
Vertical Banners” on page 86
5
To view basic print settings, select Printer
Settings from the list.
OS X 10.6 or later (when using
T7270/T5270/T3270)
On startup, the printer driver automatically
downloads information on the media in the
printer and displays it in the Page Setup and
Media Type areas. To print at current settings,
proceed to the next step.
OS X 10.6 or later (when using
T7270D/T5270D)
If Auto has been selected for Roll Switch when
the printer driver starts, the printer applies the
media type and width of the roll paper currently
in use on the printer. When the printer starts
printing, it switches to the roll paper to be
printed in accordance with the Roll Switch
Condition setting in the Setup menu of the
printer.
U“Switching Roll Paper Automatically before
Printing (T7270D/T5270D Only)” on page 93
Note:
If page settings are not displayed in the print
dialog, click the "page settings" option (e.g., Page
Setup) in the File menu.