User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
160
Administrator Menu
Item Description
Change Password Enter an administrator password of up to 20 characters.
Selecting Administrator Menu displays a password prompt. The Administrator
Menu will only be displayed if the correct password is entered, preventing
non-administrators from accidentally changing settings.
Keep the password in a safe place.
Should you forget the password, contact Epson Support.
Operational
Control
Network Setup Password Required Choose whether the administrator password is
required to access Network Setup from the
control panel or Remote Manager.
No Password Required
*
Power Cleaning
Inspect the printed pattern and select the check boxes for patterns with faint or
missing areas. To select all nozzles, place a check in the box on the left.
Format HDD
*3
Non-Secure
(Quick)
A confirmation message is displayed, if you approve, the optional hard disk unit
or Adobe PostScript 3 Expansion Unit (hereinafter referred to as the hard disk)
that is installed on the printer is formatted.
You can select from the three types of formatting.
O Non-Secure (Quick): The file control information for the data saved on the
hard disk is deleted. This is also done when using a hard disk that was used
in a different printer as a replacement in your printer.
O Secure (Quick): The entire hard disk is overwritten with a random strings.
The data is deleted more securely than with Non-Secure (Quick). However,
it may be possible to recover the data by using special data retrieval tools.
O Secure (Sanitizing): The disk is overwritten with 00/FF/random data by
using an algorithm that is compliant with the US Department of Defense
(DoD 5220-22m). This takes the most time for the formatting to finish, but
the data is the most securely deleted. Select this to delete highly
confidential data.
Secure (Quick)
Secure (Sanitizing)
Printer Mode Auto
*
Normally, leave the setting at Auto. Sent print data is identified, and the
operation mode is switched automatically. If operation mode switching is not
performed correctly, and printing is not performed correctly, set to the operation
mode to be used.
PostScript
*4
HP-GL/2
Date And Time MM/DD/YY HH:MM Set the printer’s built-in clock. The time provided
by the clock is used when printing logs and status
sheets.
Time Zone Enter the difference between the current time zone and GMT.
The selected time zone is used in e-mail notifications sent by Remote Manager
when an error occurs and so on.