User's Manual

Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
142
Paper menu
If you use the Custom Paper Setting to register print settings for commercial paper on the T7270D/T5270D,
observe the following precautions.
If you are printing on both the Roll 1 and Roll 2, configure them individually, even when the paper is the same. If
the Custom Paper Setting set by the conditions set in Roll 1 is applied to the same type of paper loaded in Roll 2, but
the paper path, paper width, or other print conditions are different, printing will not be performed correctly.
*1. T7270D/T5270D only
*2. T7270/T5270/T3270 only
*3. When the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected only
*4. When the optional Adobe PostScript 3 Expansion Unit has been connected only
* Default setting
Item Description
Load/Remove Paper Remove Paper Instructions are not displayed if no paper is
loaded.
Roll Paper
*2
Highlight the paper to be loaded and press the
Z button. Follow the on-screen instructions to
load the paper.
If paper is already loaded in the printer, the
instructions for removing the loaded paper type
will be displayed before loading instructions are
shown.
Roll 1
*1
Roll 2
*1
Cut Sheet (up to
0.8 mm thick)
Poster Board
Select
Paper Type
Plain Paper Select the type of paper loaded.
Photo Paper
Matte Paper
Others
Custom Paper Select the name of the custom paper loaded in the printer.