User's Manual
Table Of Contents
- Introduction
- Basic Operations
- Loading and Removing the Roll Paper
- Loading and Removing Cut Sheets
- Loading and Removing Poster Board
- Viewing and Changing Media Settings
- Replacing Paper
- Using the Paper Basket (T7270/T5270/T3270)
- Using the Large-Capacity Paper Basket (T7270D/T5270D)
- Using the Auto Take-up Reel Unit (T7270 Only)
- Basic Printing Methods (Windows)
- Basic Printing Methods (OS X)
- Printable area
- Using the Power Off Timer
- Canceling Printing
- Saving to and Reprinting on the Optional Hard Disk Unit
- Copying and Scanning
- Print From Folder
- More Ways to Print
- Enlargements and Horizontal and Vertical Banners
- Printing at Non-Standard Sizes
- Printing CAD Drawings
- Switching Roll Paper Automatically before Printing (T7270D/T5270D Only)
- Borderless Printing
- Correct color and print
- Multi-Page/Poster Printing
- Printing Multiple Documents (the Layout Manager) (Windows Only)
- Color Management Printing
- Tips for Using the Printer Driver (Windows)
- Tips for Using the Printer Driver (OS X)
- Using the Control Panel Menu
- Maintenance
- Problem Solver
- Appendix
- Where To Get Help
- Software License Terms
Epson SureColor T-Series User Guide
Introduction
10
D Paper basket/Large-capacity paper basket
Output from the printer collects in this basket, keeping the media clean and free of creases.
U“Using the Paper Basket (T7270/T5270/T3270)” on page 47
U“Using the Large-Capacity Paper Basket (T7270D/T5270D)” on page 51
E Casters
There are two casters on each leg. The casters are normally kept locked once the printer is in place.
F Stack guides
(T7270/T5270/T3270 only)
Select a guide according to the size of the media output to the paper basket.
U“Using the Paper Basket (T7270/T5270/T3270)” on page 47
G Stack guide switch lever
(T7270/T5270/T3270 only)
Use to choose a stack guide.
H Cartridge cover
Open when replacing ink cartridges.
U“Replacing Ink Cartridges” on page 172
I Ink cartridges
Install all ink cartridges into each slot.
J AC inlet
Connect the supplied power cable here.
K Option port
Use when connecting the options such as the Multifunction Scanner.
L USB port
Use when connecting to a computer using a USB cable.
M LAN port
Connects the LAN cable.
N Data light
The network connection status and data reception are indicated by a lit or flashing light.
On : Connected.
Flashing : Receiving data.
O Status light
The color indicates the network transmission speed.
Off : 10Base-T
Red : 100Base-T
Green : 1000Base-T
P Control panel
U“Control panel” on page 14