User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using the Control Panel Menus
- Refilling Ink
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Notices
162
5. Check the ejected paper to see if it is clean.
• If you see ink smears, press and hold Run Again. Repeat until there is no more ink on the ejected
paper.
• If there is no ink visible, select Done.
Parent topic: Adjusting Print Quality
Related tasks
Loading Paper in the Auto Sheet Feeder
Cleaning the Roll Paper Feeder
If ink smears on a printout when printing on roll paper or cut sheets, you can clean the roll paper feeder
to remove excess ink.
1. Make sure roll paper is loaded in the printer.
2. Press the home button, if necessary.
3. Select Paper Setting > Roll Paper > Feed/Cut Paper.
4. Press and hold Forward until there are no ink smears on the ejected roll paper.
5. Select Cut to cut the roll paper.
Parent topic: Adjusting Print Quality
Related references
Paper Setting Menu
Related tasks
Loading Roll Paper