User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using the Control Panel Menus
- Refilling Ink
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Windows System Requirements
- Mac System Requirements
- Paper Specifications
- Printable Area Specifications
- Ink Specifications
- Dimension Specifications
- Electrical Specifications
- Environmental Specifications
- Interface Specifications
- Network Interface Specifications
- Safety and Approvals Specifications
- Safety and Approvals Specifications for Latin America
- Notices
118
You see this screen:
7. Change the settings as necessary.
8. Select the left arrow to return to the previous screen.
9. Select Printing Language.
• If you are printing over USB, select USB and change the Printing Language setting to HP-GL/2.
• If you are printing over a network, select Network and change the Printing Language setting to
HP-GL/2.
Note: Make sure you return the Printing Language setting to Auto when you are done printing in
HP-GL/2 mode.
10. Open the file you want to print in your CAD software.
11. Click Plot and select your product as the printer.
12. Start printing your drawing from the CAD software.
Parent topic: Printing CAD Drawings