User Manual

182
• If the bottom edge is scuffed, try widening the bottom margin.
• If ink is smeared on your prints, clean the rollers. Load blank paper and perform a paper guide
cleaning.
• If you are using non-Epson media, make sure you create a custom paper configuration for the media.
• Depending on the print density and type of paper you are using, the ink may take a while to dry. Do not
stack the prints until the ink is completely dry. You can adjust the drying time in the Printer Settings
menu.
• Adjust the ink density in the printer driver settings and on the control panel for custom paper
configuration settings.
Parent topic: Solving Print Quality Problems
Related references
Paper Specifications
Paper Setting Menu
Printer Settings Menu
Related tasks
Selecting Basic Print Settings - Windows
Selecting Basic Print Settings - Mac
Creating Custom Paper Configurations
Cleaning the Auto Sheet Feeder
Cleaning the Roll Paper Feeder
Prints are Not Positioned Properly
If your prints are not positioned properly on the media, try these solutions:
• Make sure your print settings in the control panel and the printer driver match.
• Make sure the Document Size or Paper Size setting in the printer driver matches the paper loaded in
the product.
• Check for paper skew errors on the LCD screen. Make sure the Detect Paper Meandering setting in
Printer Settings is set to On.
• Margin settings made in the printer driver have priority over margin settings made in the control panel.
Parent topic: Solving Print Quality Problems
Related references
Printer Settings Menu