User's Manual

51
Related references
Compatible Epson Papers
Paper Specifications
Roll Paper Options - Windows
Related tasks
Removing Roll Paper
Selecting Advanced Settings - Mac
Cutting Roll Paper
The printer has a built-in cutter that can automatically cut most paper types. When Auto Cut is turned on,
paper is automatically cut after each page prints, or if the roll paper leading edge is not straight.
Caution: Use of the built-in cutter is not recommended for commercially available canvas or synthetic
paper, as it may dull the blade and require more frequent blade replacement. When you print on this
paper type, disable the Auto Cut setting and cut the print off the roll manually.
To switch between automatic or manual cutting methods, adjust the Auto Cut settings in the printer
driver. The setting selected in the printer driver overrides the control panel setting.
Cutting Roll Paper Manually
Parent topic: Roll Paper Handling
Related references
Roll Paper Options - Windows
Related tasks
Selecting Advanced Settings - Mac
Cutting Roll Paper Manually
You can keep your prints on the roll until you manually cut them.
1. Turn off the Auto Cut setting in the printer driver or the control panel, depending on the situation:
• If you want to cut the paper manually, turn off the setting in the printer driver. Select Advanced >
Roll Paper Option > Auto Cut.
Note: The Auto Cut setting in the printer driver takes priority over the setting in the control panel.
The printer driver setting returns to automatic cutting when you close the application.