User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wi-Fi or Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Advanced Settings - Windows
- Selecting Additional Settings - Windows
- Printing Your Document - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing with the Built-in Epson Driver - Windows 10 S
- Printing on a Mac
- Printing CAD Drawings
- Printing with Windows
- Using Your Printer as a Copier
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
157
Cleaning the Auto Sheet Feeder
If ink smears on a printout when printing from the auto sheet feeder (especially on glossy paper), you
can clean the auto sheet feeder roller to remove excess ink.
Note: If ink smears when printing on glossy paper, we recommend printing individual cut sheets one at a
time instead of using the auto sheet feeder.
1. Load a few sheets of plain paper in the auto sheet feeder.
2. Press the home button, if necessary.
3. Select Settings > Maintenance > Paper Guide Cleaning.
You see a screen like this:
4. Select Start to clean the paper guide.
The paper is ejected.
5. Check the ejected paper to see if it is clean.
• If you see ink smears, press and hold Run Again. Repeat until there is no more ink on the ejected
paper.
• If there is no ink visible, select Done.
Parent topic: Adjusting Print Quality
Related tasks
Loading Paper in the Auto Sheet Feeder