User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
54
5. Feed the sheet into the right side of the paper feed slot until it meets resistance. Align the right edge
of the sheet with the vertical line on the roll paper cover as shown. Make sure the printable side of
the sheet is visible.
6. Select Complete > OK on the LCD screen.
7. Select a paper type and paper size that matches the loaded paper. If you need to adjust any specific
settings, select Advanced Paper Settings.
Note: Store cut sheet media flat in its original packaging. Storing sheet media unprotected or on its
long or short edge can lead to excess paper curl and cause damage to the printer and ruined prints.
8. To remove a cut sheet from the printer, support the paper so it doesn't fall, then select the paper
information area on the LCD screen and select Remove .
Parent topic: Cut Sheet Handling
Related references
Paper Setting Menu