User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
49
Removing Roll Paper
When you finish printing on roll paper, remove it from the printer to avoid indenting or creasing the paper.
Note: If you enabled Remaining Amount Management, the printer prints a barcode on the leading
edge of the roll when you remove the roll paper. When you reload the paper, the printer reads the
barcode and automatically sets the paper type and amount remaining.
1. On the LCD screen, select the paper information area and select Remove.
The printer rewinds the roll paper.
Note: If printed paper is not cut and remains loaded in the printer, a confirmation screen appears.
Select Cut to cut the paper at the default cut position or select Print Cutting Guidelines to print cut
lines at the default position.
2. Open the roll paper cover.