User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
48
1. With the front cover closed, select on the LCD screen and hold down either Forward or
Backwards until the cut location reaches the cutting position labeled on the printer as shown.
2. Select Cut.
You see a confirmation screen. Select OK to cut the paper.
Note: If the paper cannot be cut by the built-in cutter, select > Forward until your print is clear of the
printer, then cut the print by hand.
Parent topic: Cutting Roll Paper
Printing Cutting Guidelines
When you disable the Auto Cut setting, you can print a cutting guideline between print jobs as a guide for
manual cutting.
1. Press the home button, if necessary.
2. Select Menu > Printer Settings > Paper Source Settings > Roll Paper Setup > Cut Settings >
Print Cutting Guidelines and set it to On.
Parent topic: Cutting Roll Paper