User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
47
Cutting Roll Paper
The printer has a built-in cutter that can automatically cut most paper types or you can cut your prints
manually. To switch between cutting methods, select Menu > General Settings > Printer Settings >
Paper Source Settings > Roll Paper Setup > Cut Settings > Auto Cut on the control panel or adjust
the auto cut settings in the printer driver. The setting selected in the printer driver overrides the control
panel setting.
Note: If you are using the optional Auto Take-up Reel, disable the auto cut setting in the printer driver
and on the control panel.
Caution: Do not use the built-in cutter with these paper types or you may damage or dull the built-in
cutter:
• Fine art paper
• Canvas
• Vinyl
• Matte poster board
• Adhesive paper
• Banner media
When you print on these paper types, you need to disable the Auto Cut setting and cut the print
manually. You can print cutting guidelines to help you.
Cutting Roll Paper Manually
Printing Cutting Guidelines
Parent topic: Roll Paper Handling
Related topics
Using the Auto Take-up Reel
Cutting Roll Paper Manually
You can disable the Auto Cut option to keep your prints on the roll until you manually cut them using the
built-in cutter.