User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
192
8. Select Start to print an adjustment pattern.
9. Depending on your adjustment selection, do one of the following:
• Quality First: Follow the instructions on the LCD screen to select the best patterns for the first set
of adjustment patterns and select OK.
After the second set of adjustment patterns prints, repeat the process.
• Length Accuracy First: Use a ruler that can measure in 0.5 mm increments to measure the
registration marks. Enter the measurement on the LCD screen and select OK.
The screen displays a confirmation message and returns to the home screen.
Parent topic: Adjusting Print Quality
Cleaning the Roll Paper Feeder
If ink smears when printing on roll paper or cut sheets, you can clean the roll paper feeder using plain
paper to remove excess ink.
1. Load the widest available roll paper in the printer.
2. Press the home button, if necessary.
3. Select Paper Setting > Roll Paper > Feed/Cut Paper.
4. Select and press and hold Forward until there are no ink smears on the ejected roll paper.
5. Select Cut to cut the roll paper.
Parent topic: Adjusting Print Quality