User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
191
Adjusting the Paper Feed Using the Product Control Panel
If your printouts are grainy or blurry, or you see dark or light horizontal bands, you may need to adjust the
paper feed using the product control panel.
1. Load roll paper or cut sheet paper in the printer.
Note: Load paper that is at least 15.7 inches wide by 22 inches long (400 mm × 560 mm).
2. Make sure the correct paper type is selected.
3. Press the home button, if necessary.
4. Select Menu > Paper Setting.
5. Select the option for the paper loaded in the printer.
6. Select Print Adjustments > Paper Feed Adjust.
7. Select one of the following:
• Quality First: prints adjustment patterns to adjust the feed for image quality. Epson recommends
running this option first.
• Length Accuracy First: prints measurement positions to adjust the feed for images that require
more precise dimensions and length
Note: You will need a 24-inch (610 mm) ruler that can measure in 0.5 mm increments to perform
the adjustment.