User's Manual
Table Of Contents
- Contents
- Introduction to Your Printer
- Wired Networking
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Printing Your Document or Photo - Windows
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Boxes
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
187
Parent topic: Adjusting Print Quality
Aligning the Print Head Automatically Using the Product Control Panel
You can automatically align the print head using the control panel on your product. Make sure no direct
sunlight enters the printer, or the alignment pattern may not be read correctly.
Note: You must manually align the print head when you are using any transparent or colored paper or on
these paper types: Plain paper, Epson Enhanced Matte Posterboard.
1. Load roll paper or cut sheet paper in the printer.
Note: Load paper that is at least 15.2 inches (388 mm) wide.
2. Make sure the correct paper type is selected.
Note: If you are using commercially available paper, make sure you create the custom paper
settings in advance.
3. Press the home button, if necessary.
4. Select Menu > Paper Setting.
5. Select the option for the paper loaded in the printer.
6. Select Print Adjustments > Print Head Alignment.