User's Manual

149
Setting Options Description
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
follow the cut settings in Printer Settings >
Paper Source Settings > Roll Paper Setup
> Cut Settings, or select Never Cut to cut
paper manually
Skew Reduction On
Off
Select On to enable paper skew reduction
Roll Core Diameter 2inch
3inch
Select the paper core size for the loaded roll
paper
Lateral Feed Adjustment On
Off
Select On to correct differences between the
left and right sides of the paper feed
Paper Eject Roller Auto
Use
Do Not Use
Select to control the paper ejection roller;
select Auto to use the roller automatically
depending on the type of Epson paper; select
Use to always use the roller to eject paper;
select Do Not Use when you are concerned
about damaging the print surface
Paper Feed Offset –1.0 to 1.53% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.
Restore Default Settings — Restores advanced paper settings to their
default values; not available with custom
paper types
Caution: If the Paper Size Check setting is set to Off, the printer may print beyond the edges of the
paper, causing ink to get on the printer.
Cut Sheet menu
Setting Options Description
Remove — Ejects the loaded cut sheet