User Guide

70
Related topics
Cutting Roll Paper
About the Optional Auto Take-up Reel
The optional auto take-up reel automatically rolls up printed media as you print.
You can use the auto take-up reel for media with the printable side in (on the left) or printable side out
(on the right).
It is best to do the following when using the auto take-up reel:
• Make sure that the end of the roll is cut straight across.
• Load media with the printable side in.
• Use a take-up roll core that is the same width as your media so the core does not bend or take up
media incorrectly.
Caution: Make sure you fix the roll core in place as described in the documentation and make sure your
hair, hands, or other objects do not get caught in the moving parts of the auto take-up reel, or injury may
occur.
Parent topic: Using the Auto Take-up Reel
Take Up with the Printable Side In
After you attach the roll core on the Auto Take-up Reel as described in the documentation that came with
the Auto Take-up Reel, follow these steps to take up media with the printable side in.
Note: Make sure Auto Cut is set to Off when you use the Auto Take-up Reel.