User Guide

1. Load the type of paper that you want to configure in the printer.

2. Select Menu > General Settings > Printer Settings > Custom Paper Setting.

3. Select a number for the custom paper setting.

Note: You cannot change paper setting information registered using the printer driver or other

software using the LCD screen.

4. Select Change Reference Paper.

5. Select a paper preset that is similar to the paper that you loaded following these guidelines:

• Glossy paper: Photo Paper or Proofing Paper

• Thick, non-glossy paper: Matte Paper

• Thin, soft, non-glossy paper: Plain Paper

• Cotton paper with a rough surface: Fine Art Paper

• Special media such as film, cloth, poster board, or tracing paper: Others

6. Select Advanced Paper Settings and enter a value for the following settings:

• Thickness

• Roll Core Diameter (roll paper only)

• Paper Feed Offset (leave at 0 unless you see horizontal banding)

7. Select any additional settings in the Advanced Paper Settings menu, as necessary.

After you create a new custom paper setting, it will appear in the list of available paper types.

Note: You can also use Epson Media Installer to create custom paper settings.

Creating Custom Paper Settings Using Epson Media Installer

Selecting Custom Paper Settings

Downloading Epson Media Settings

Parent topic: Media Handling

Creating Custom Paper Settings Using Epson Media Installer

You can create and store up to 30 custom paper settings for use in printing on non-Epson paper or paper

that is not supported by the Epson printer driver. You create custom paper settings by copying an

existing paper setting, renaming it, and assigning an ICC profile.