User Guide

56
5. Feed the sheet into the right side of the paper slot until it meets resistance. Align the right edge of
the sheet with the vertical line on the roll paper cover as shown. Make sure the printable side of the
sheet is visible.
6. Select Complete > OK on the LCD screen
7. Select a media type that matches the loaded paper.
Note: Store cut sheet media flat in its original packaging. Storing sheet media unprotected or on its
long or short edge can lead to excess paper curl and cause damage to the printer and ruined prints.
8. To remove a poster board from the printer, select the paper information area on the LCD screen and
select Remove.
Parent topic: Cut Sheet Handling
Creating Custom Paper Settings
You can create and store up to 30 custom paper settings for use in printing on non-Epson paper or paper
that is not supported by the Epson printer driver.