User Guide

54
5. Feed the sheet into the right side of the paper slot until it meets resistance. Align the right edge of
the sheet with the vertical line on the roll paper cover as shown. Make sure the printable side of the
sheet is visible.
6. Select Complete > OK on the LCD screen.
7. Select a paper type and paper size that matches the loaded paper. If you need to adjust any specific
settings, select Advanced Paper Settings.
Note: Store cut sheet media flat in its original packaging. Storing sheet media unprotected or on its
long or short edge can lead to excess paper curl and cause damage to the printer and ruined prints.
8. To remove a cut sheet from the printer, select the paper information area on the LCD screen and
select Remove.
Parent topic: Cut Sheet Handling
Related tasks
Removing Roll Paper