User Guide

15. Close the roll paper cover.

Note: To prevent dust from accumulating inside the printer, always keep the roll paper cover closed

unless you are loading or unloading media.

16. On the LCD screen, select the paper type for the loaded paper.

Note: If the roll paper has a barcode printed on it, the printer reads it and automatically loads the

correct settings.

17. If you want to track the amount of paper remaining on the roll, do the following:

• Select Paper Remaining and turn on Remaining Amount Management.

• Select Remaining Amount and enter the length of the roll paper.

• If you want to be notified when paper is low, select Remaining Alert and enter an amount.

Note: When you enable Remaining Amount Management, the printer prints a barcode on the

leading edge of the roll when you remove the roll paper. When you reload the paper, the printer

reads the barcode and automatically sets the paper type and amount remaining.

18. Select Advanced Paper Settings and set any additional settings, if necessary.

19. Select OK when you are finished.

Parent topic: Roll Paper Handling

Cutting Roll Paper

The printer has a built-in cutter that can automatically cut most paper types or you can cut your prints

manually. To switch between cutting methods, select Menu > Printer Settings > Paper Source