User Guide

189

7. Select one of the following:

• Uni-D Alignment: aligns each color for uni-directional printing (takes 25 to 35 minutes to

complete)

• Bi-D Alignment: aligns each color for bi-directional printing (takes 9 to 13 minutes to complete)

8. Select Auto and select Start.

The sensor reads the adjustment pattern and automatically aligns the print head.

Note: Do not open the front cover or turn off the printer during the alignment process.

9. After the alignment is complete, check the results.

If the print head still seems misaligned, select a different alignment method and repeat the process. If

your printer still is not properly aligned, perform a manual head alignment.

Parent topic: Print Head Alignment

Related tasks

Loading Roll Paper

Loading Cut Sheets

Creating Custom Paper Settings

Aligning the Print Head Manually Using the Product Control Panel

If you cannot run an automatic print head alignment on your paper or automatic alignment does not

correct the problem, you can manually align the print head using the control panel on your product.

1. Load roll paper or cut sheet paper in the printer.

Note: Load paper that is at least 15.7 inches wide by 22 inches long (400 mm × 560 mm).

2. Make sure the correct paper type is selected.

Note: If you are using commercially available paper, make sure you create the custom paper

settings in advance.

3. Press the home button, if necessary.