User Guide

186
Running a Power Cleaning Using the Product Control Panel
If print head nozzles are still clogged after cleaning the print head several times, run the Power
Cleaning utility from the product control panel. This process consumes a lot of ink to clean the clogged
nozzles.
1. Load roll or cut sheet paper in the printer.
2. Make sure the correct paper type is selected.
3. Press the home button, if necessary.
4. Select Menu > Maintenance > Power Cleaning.
You see a screen like this:
5. Select the nozzle pairs you want to clean or select All Colors and select OK to begin the power
cleaning cycle.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
6. Select Yes to print a nozzle check pattern.
The nozzle pattern prints.