User Guide

185
The power light begins flashing. When the cleaning cycle is finished, the power light stops flashing
and a confirmation screen appears.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
7. Click Nozzle Check.
8. Click OK.
The nozzle pattern prints.
9. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
If you don’t see any improvement after cleaning the print head several times, run a Power Cleaning.
Parent topic: Print Head Cleaning
Related references
Maintenance Menu
Related tasks
Running a Power Cleaning Using the Product Control Panel
Removing and Installing Ink Cartridges
Checking the Nozzles Using a Computer Utility