User Guide

182
Cleaning the Print Head Using a Computer Utility
Running a Power Cleaning Using the Product Control Panel
Parent topic: Print Head Maintenance
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
Note: Ink is consumed during print head cleaning. Clean the print head only if the print quality declines.
1. Load roll or cut sheet paper in the printer.
2. Make sure the correct paper type is selected.
3. Select Menu > Maintenance > Print Head Cleaning.
4. Select one of the following:
• To clean all nozzles, select All Nozzles and press the right arrow.
• To clean specific nozzles, select them.
5. Select OK to start the cleaning cycle.
When the cleaning cycle is finished, a confirmation screen appears.
Caution: Never turn off the product during a cleaning cycle or you may damage it.
6. Select Yes to print a nozzle check pattern.