User Guide

163
Setting Options Description
Drying Time Drying Time per Pass Select from 0 to 10 seconds for the amount of
time the print head pauses to allow drying
after each pass
Drying Time per Page Select from 0 to 60 minutes for the amount of
time the printer pauses to allow drying after
each page is printed
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded.
Select Off if a paper setting error occurs when
paper is correctly loaded.
Note: If this setting is set to Off, the printer
may print beyond the edges of the paper,
causing ink to get on the printer.
Auto Cut Follow Paper Source
Settings
Never Cut
Select Follow Paper Source Settings to
automatically cut roll paper after each page is
printed depending on the paper source
settings, or select Never Cut to cut paper
manually
Skew Reduction On
Off
Select On to enable paper skew reduction
Roll Core Diameter 2-inch
3-inch
Sets the paper core size for the loaded roll
paper
Lateral Feed Adjustment On
Off
Corrects differences between the left and right
of the paper feed
Paper Eject Roller Auto
Use
Do Not Use
Paper Feed Offset –1.0 to 1.53% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.