User Guide

153
Setting Options Description
Thickness 0.01 to 1.50 mm or
0.4 to 59.1 mil
Sets the thickness of the paper; displayed
when using a custom paper type
Platen Gap 1.2
1.6
1.9
2.1
2.4
Select the distance between the print head
and the paper; displayed when using a
custom paper type
Paper Suction –4 to +3 Select to adjust the printer's suction setting;
choose lower values for thinner papers
Drying Time Drying Time per Pass Select from 0 to 10 seconds for the amount of
time the print head pauses to allow drying
after each pass
Drying Time per Page Select from 0 to 60 minutes for the amount of
time the printer pauses to allow drying after
each page is printed
Paper Size Check On
Off
Select On to detect the paper width when
paper is loaded.
Select Off if a paper setting error occurs when
paper is correctly loaded.
Skew Reduction On
Off
Select On to enable paper skew reduction
Paper Eject Roller Auto
Use
Do Not Use
Select to control the paper ejection roller;
select Auto to use the roller automatically
depending on the type of Epson paper; select
Use to always use the roller to eject paper;
select Do Not Use when you are concerned
about damaging the print surface
Paper Feed Offset –1.0 to 1.53% Select the amount of offset necessary to
reduce banding on uneven color in printouts;
displayed when using a custom paper type.