User's Manual

184
LCD screen message Condition/solution
Checking hard disk Data on the optional internal print server is currently being checked. If the
results of the check show that data restoration is necessary, the optional
internal print server will start the restoration process. This may take up to 20
minutes.
If the optional internal print server cannot restore the data, the Format Hard
Disk option appears on the LCD screen. Format the optional internal print
server to continue using it. If you do not format the disk, you will not be able
to print with the optional internal print server.
SP Connection Error
See manual and
reconnect cables of
SpectroProofer Mounter
to printer.
The optional SpectroProofer mounter is not connected correctly. Turn off the
printer and make sure the SpectroProofer mounter is connected correctly.
Wait a moment, then turn on the printer again.
See the SpectroProofer mounter documentation for more details.
SProofer Disconnected
SpectroProofer Mounter
is not recognized.
Continue?
The optional SpectroProofer mounter is not connected correctly. Reconnect
the cables and select No to turn off the printer. Wait a moment, then turn on
the printer again. If you do not want to use the optional SpectroProofer,
select Yes.
See the SpectroProofer mounter documentation for more details.
ILS30EP Error
See manual and
reconnect ILS30EP to
SpectroProofer Mounter.
Turn printer off and on
again.
The optional SpectroProofer UVS is not installed correctly. Turn off the
printer and make sure the SpectroProofer mounter is connected correctly.
Wait a moment, then turn on the printer again.
See the SpectroProofer UVS documentation for more details.
ILS30EP Disconnected
ILS30EP is not
recognized. Continue?
The optional SpectroProofer UVS is not connected correctly. Reconnect the
cables and select No to turn off the printer. Wait a moment, then turn on the
printer again. If you do not want to use the optional SpectroProofer UVS,
select Yes.
See the SpectroProofer UVS documentation for more details.