User's Manual

172
Replacing the Cutter
If you notice that your paper does cut cleanly, you may need to replace the cutter.
Note: If the optional SpectroProofer is installed, remove it before replacing the cutter. See the
instructions that came with the SpectroProofer for details on removing it from your printer.
1. Remove any paper from the printer.
2. Press the Menu button.
3. Press the down arrow button to select Maintenance and press the right arrow button.
4. Select Cutter Maintenance and press the right arrow button.
5. Select Replace Cutter and press the right arrow button.
6. Press the OK button.
The cutter moves to the replacement position.
7. Press in on the tab on the cutter cover, release it, and pull down on the cutter cover to remove it.