User's Manual

167
LCD screen message Condition/solution
Paper Setting Error
This paper cannot be
loaded from paper
cassette. Insert paper
less than 0.8 mm
thickness from rear
manual feeder.
Press the pause/cancel button and select Job Cancel, then remove the
paper from the paper cassette. Print using the front or rear manual feeder,
depending on the paper thickness.
Paper Setting Error
Roll paper is loaded.
Remove it and change
paper source to roll
paper.
Pull out the roll paper and select a roll paper option from the Paper Type
menu.
Paper Skew
Load paper properly.
The paper is not loaded straight. Press the load paper button to release
the pressure roller, then load the paper correctly.
Borderless Error
Load a supported paper
size or load paper
correctly.
Check the following:
• Press the pause/cancel button and select Job Cancel, then eject the
paper. Load the correct size of paper.
• Make sure the paper is not wavy or curled.
• Load paper in the correct position depending on the paper type.
• Change the Paper Size Check setting to On.
Cleaning Error
Not enough ink.
Continue cleaning?
Select Yes. Replace any ink cartridges with low ink with new ones to
continue cleaning. After cleaning, you may reinstall the original cartridge and
use it until it is expended.
Nozzle Clog Detected
Not enough ink.
Continue cleaning?
Cleaning Error
Automatic head cleaning
failed. Retry?
The printer nozzles are still clogged even after running the automatic head
cleaning. Select Yes to run another automatic head cleaning.