User's Manual
Table Of Contents
- Contents
- Epson SureColor P5000 User's Guide
- Introduction to Your Printer
- Media Handling
- Printing from a Computer
- Printing with Windows
- Selecting Basic Print Settings - Windows
- Selecting Print Layout Options - Windows
- Selecting Additional Settings - Windows
- Printing Your Document or Photo - Windows
- Saving, Sharing, and Customizing the Printer Settings
- Selecting Default Print Settings - Windows
- Changing the Language of the Printer Software Screens
- Changing Automatic Update Options
- Printing on a Mac
- Printing with Windows
- Using the Control Panel Menus
- Replacing Ink Cartridges and Maintenance Tanks
- Adjusting Print Quality
- Maintenance and Transportation
- Solving Problems
- Technical Specifications
- Notices
156
Note: Do not touch the adhesive on the sheet (the dark gray area).
7. With the adhesive facing toward you, insert the cleaning sheet on the left side of the printer until it
reaches the end of the roll paper feed slot, then pull it out. Repeat this two to three times. Repeat for
the center and right side of the roll paper feed slot.
Note: You can use a cleaning sheet only once.
8. Press the load paper button when complete.
Parent topic: Cleaning Your Product
Related references
Optional Equipment and Replacement Parts
Replacing the Cutter
If you notice that your paper does not cut cleanly, you may need to replace the cutter.
Note: If the optional SpectroProofer is installed, remove it before replacing the cutter. See the
instructions that came with the SpectroProofer for details on removing it from your printer.
1. Remove any paper from the printer.