Specifications
Table Of Contents
- 1 Introduction
- 2 S5U1C63000H6 Package
- 3 Connection
- 4 Getting Started
- 5 Operations and Functions of the S5U1C63000H6
- 5.1 Outline of Operation
- 5.2 Break Function
- 5.3 Monitoring Terminals
- 5.4 Display During Execution and During Break
- 5.5 Break Commands
- 5.6 Target Interrupt and Break
- 5.7 Trace Function
- 5.8 Trace Mode
- 5.9 Trace Trigger Point
- 5.10 Coverage Function
- 5.11 Measurement of Execution Time
- 5.12 Self-Diagnostic Function
- 5.13 Restrictions on Emulation
- 6 LCD Driver
- 7 Notes on Use
- 8 Maintenance and Warranty
- 9 Troubleshooting
NOTICE
No part of this material may be reproduced or duplicated in any form or by any means without the written permission
of Seiko Epson. Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not
assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or
use in any product or circuit and, further, there is no representation that this material is applicable to products requir-
ing high level reliability, such as medical products. Moreover, no license to any intellectual property rights is granted by
implication or otherwise, and there is no representation or warranty that anything made in accordance with this mate-
rial will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain
technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade
Law of Japan and may require an export license from the Ministry of Economy, Trade and Industry or other approval
from another government agency.
© SEIKO EPSON CORPORATION 2007, All rights reserved.